Question

將5克鋅投入到105克稀硫酸里，鋅全部溶解生成硫酸鋅，反應后硫酸鋅溶液的溶質質量分數為C₁；10克鋅投入100克稀硫酸時里，鋅也全部反應為硫酸鋅，反應后硫酸鋅溶液的溶質質量分數為C₂．則C₁和C₂的大小關系是

1. A.
   C₁=C₂
2. B.
   C₂＜2C₁
3. C.
   C₂＞2C₁
4. D.
   C₂=2C₁

Answer 1

C
分析：10g鋅全部反應為硫酸鋅的質量為5g鋅全部溶解生成硫酸鋅質量的2倍，即溶液的溶質質量分數為C₂的硫酸鋅溶液中溶質質量是溶液的溶質質量分數為C₁的硫酸鋅溶液中溶質質量的2倍；若的反應不放出氫氣，反應后兩溶液的質量相等，此時C₂=2C₁；考慮到10g鋅全部反應放出氫氣質量大于510g鋅全部反應放出氫氣質量，即溶液的溶質質量分數為C₂的硫酸鋅溶液中溶液質量小于溶液的溶質質量分數為C₁的硫酸鋅溶液中溶液質量，因此，C₂＞2C₁．
解答：根據鋅與硫酸反應生成硫酸鋅和氫氣，5g鋅全部反應生成硫酸鋅及放出氫氣的質量均為10g鋅全部反應生成硫酸鋅質量及放出氫氣質量的一半；
根據質量守恒定律，溶液的溶質質量分數為C₂的硫酸鋅溶液中溶液質量小于溶液的溶質質量分數為C₁的硫酸鋅溶液中溶液質量，而溶液的溶質質量分數為C₂的硫酸鋅溶液中溶質質量是溶液的溶質質量分數為C₁的硫酸鋅溶液中溶質質量的2倍；
根據溶液中溶質質量分數=×100%，可判斷得到C₁和C₂的大小關系為C₂＞2C₁；
故選C．
點評：根據質量守恒定律，鋅與硫酸反應后所得溶液的質量=鋅的質量+所加稀硫酸的質量-放出氫氣的質量．